Thursday, June 12, 2014

The Results

First and foremost, Jeff did not find anything wrong with the 900MHz antenna feed line. The antenna mounting could be improved but that is not the cause of the problem. So I have to keep looking. It is also still possible that there is, indeed, a problem with the 900 MHz feedline but it is not obvious.

The TV signals improved dramatically.I now receive the following digital channels Off-The-Air, in spite of the lush forest:
- 4.1 CBOT (CBC Ottawa)
- 6.1 CIII (Global)
- 8 CFCF (CTV Mntrl analogue)
- 9.1 CBOFT-D (SRC Ottawa)
- 11.1 CHCH (Hamilton)
- 13.1 CJOH (CTV Ottawa)
- 14.1 OMNI-2 (Toronto)
- 24.1 TVO (Toronto)
- 30.1 CIVO-F (RQ Gatineau)
- 34.1 CFGS-F (TQS Gatineau)
- 40.1 CHOT-F (TVA Gatineau)
- 42.1 CTS-HD (Burlington)
- 43.1 CHRO (CTV2 Ottawa)
- 60.1 OMNI-1 (Toronto)
- 65.1 CITY TV (Toronto)

The Ubiquity M2 and M5 appear to be working ok. Time will tell if they need re-aiming.

Thanks to Jeff, Jim and Ying for a great day.
73.
Rick (VE3CVG)

Tower Work

14 years ago I underestimated the role that this tower would play in my hobby. I should have installed a tilt-over, crank-up tower. Yes it would have required a bigger concrete base and yes it would have cost considerably more but I could have accessed my own antennas without climbing. Fortunately there are a few hams who will help out fellow hams by doing the trickiest part of tower work ... climbing.

Jeff (VA3ISP) let me know that he would be available to climb my tower at 11am on Monday, June 9 and I should get ready and line up some helpers. I was fortunate enough to get the help of 2 good friends: Ying (VA3YH) and Jim (VA3KV), who made themselves available on short notice.

I am particularly grateful for the help of these guys because on Sunday, I managed to pull my back while starting my chainsaw. As a result I was not quite as mobile as I would have liked.

Ying and I had pre-tested a new TV antenna, a Ubiquity M2 module and a Ubiquity M5 module on a short mast near my tower. Once it is up on the tower, a device is a lot harder to replace or modify, so the more that can be pre-tested, the better.

I also made sure that I had a cable to replace the feed line around the tower bearing, in case that was the problem. There is no time for fooling around building cables, etc. when a climber is standing on a tower, so all this must be ready ahead of time.

First thing Monday morning, I lowered all possible feedlines and antennas that were on the tower, to ensure that Jeff would not have too much stuff in his way during the climb. I also cleared the area around the base of tower of obstacles.

Jim and Ying arrived at about 11am and Jeff pulled in shortly later. The weather was perfect, about 20C and sunny, with an occasional breeze to keep the mosquitoes away. The pictures tell much of the story.

My Radio Tower


Close-Up of the Antennas


L-to-R Jeff VA3ISP, Jim VA3KV, Ying VA3YH


Jeff Going Up


Jeff is Near the Top


Getting Strapped In


Close-Up of the Rotor


Attaching the M2 Module


M2 in Place


TV Antenna is in Place at the Top


Mounting the M5 unit


Close-Up of the M5


After the climb, we re-grouped at Broadway's Restaurant in Rockland for a light lunch. It was an excellent day.

Background

I own a 48 foot high Delhi (non-continuous taper) tower for my ham radio activities. It is free-standing and located on the west side of the house. Over the course of the last few years, several issues and wants have come up regarding the tower:

- my 903MHz looper antenna was apparently not working as of February 2014. Disappointing. I need an inspection to tell me if the feedline is in good condition.

- I am migrating from satellite TV to off-the-air (OTA) free TV. My OTA antenna was mounted only at about 20' and blocked by a lush deciduous forest 3 seasons of the year. The resulting TV signals are limited and could be greatly improved. Mounting on the tower at about 40' would help a great deal.

- I am experimenting with HamNet, a mesh network for licenced amateur radio operators only, which is a free, locally managed, backup internet. This requires mounting a Ubiquity M2 loco module up high. Again, the forest is a major obstacle at the mesh frequencies (2.4GHz).

- I am experimenting with 5.8GHz using Ubiquity M5 microwave dish modules. Same issues as above w.r.t. height and radio frequency absorption by deciduous trees.