Thursday, June 12, 2014

Background

I own a 48 foot high Delhi (non-continuous taper) tower for my ham radio activities. It is free-standing and located on the west side of the house. Over the course of the last few years, several issues and wants have come up regarding the tower:

- my 903MHz looper antenna was apparently not working as of February 2014. Disappointing. I need an inspection to tell me if the feedline is in good condition.

- I am migrating from satellite TV to off-the-air (OTA) free TV. My OTA antenna was mounted only at about 20' and blocked by a lush deciduous forest 3 seasons of the year. The resulting TV signals are limited and could be greatly improved. Mounting on the tower at about 40' would help a great deal.

- I am experimenting with HamNet, a mesh network for licenced amateur radio operators only, which is a free, locally managed, backup internet. This requires mounting a Ubiquity M2 loco module up high. Again, the forest is a major obstacle at the mesh frequencies (2.4GHz).

- I am experimenting with 5.8GHz using Ubiquity M5 microwave dish modules. Same issues as above w.r.t. height and radio frequency absorption by deciduous trees.

No comments:

Post a Comment